| 品牌：DIC | 是否进口：否 | 产地：日本 |
| 厂家(产地)：日本油墨 | 牌号：FZ-1140-R5 | 品名：PPS |
| 产品规格：25KG/包 | 产品特性：耐水解PPS | 销售方式：品牌经销 |
| 类型：标准料 | 加工级别：注塑级 | 特性级别：阻燃级、增强级、***、耐水解、高强度 |
油墨40%玻纤耐水解PPS FZ-1140-R5
Density / Specific Gravity | 1.66 | g/cm | ASTM D792 |
Molding Shrinkage | ASTM D955 | ||
Flow | 0.25 | % | |
Across Flow | 1.1 | % | |
Water Absorption(24 hr, 23°C) | 0.020 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness | ASTM D785 | ||
M-Scale | 100 | ||
R-Scale | 121 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 15000 | MPa | ASTM D638 |
Tensile Strength | 180 | MPa | ASTM D638 |
Tensile Elongation(Break) | 1.8 | % | ASTM D638 |
Flexural Modulus | 13500 | MPa | ASTM D790 |
Flexural Strength | 260 | MPa | ASTM D790 |
Flexural Elongation (Break) | 2.5 | % | ASTM D790 |
Compressive Strength | 200 | MPa | ASTM D695 |
Poisson&＃39;s Ratio | 0.36 | ||
Coefficient of Friction | ASTM D1894 | ||
vs. Steel - Dynamic | 0.35 | ||
vs. Steel - Static | 0.35 | ||
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | 100 | J/m | ASTM D256 |
Unnotched Izod Impact | 600 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load(1.8 MPa, Unannealed) | 265 | °C | ASTM D648 |
CLTE | ASTM D696 | ||
Flow : -30 to 90°C | 2.2E-5 | cm/cm/°C | |
Transverse : -30 to 90°C | 2.2E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
Dielectric Strength(1.60 mm) | 16 | kV/mm | ASTM D149 |
Dielectric Constant(1 MHz) | 4.00 | ASTM D150 | |
Dissipation Factor(1 MHz) | 2.0E-3 | ASTM D150 | |
Arc Resistance | 125 | sec | ASTM D495 |
Comparative Tracking Index | 170 | V | ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating(0.40 mm) | V-0 | UL 94 |
PPS用于汽车工业占45%左右，主要用于汽车功能件，点火器，加热器，温控器，灯座，轴承；如可代替金属制作排气筒循环阀及水泵叶轮，气动信号调解器等。
（2）电子电器：PPS用于电子电器工业可占30%，它适合于环境温度高于200℃的高温电器元件；可制造发电机和发动机上的点涮、电涮托架、启动器线圈、屏蔽罩及叶片等；在电视机上，可用于高电压外壳及插座、接线柱及端子板等；在电子工业、制造变压器、阻流圈及继电器的骨架和壳体，集成电路载体；利用高频性能，制造H级绕线架和微调电容器等。
（3）机械工业：用于壳体、结构件、***件及密封材料，具体有泵体、阀门、轴承、轴承支架、活塞环及齿轮等。
