| 品牌：TENAC | 是否进口：否 | 产地：日本 |
| 厂家(产地)：日本旭化成 | 牌号：GN705 | 销售方式：品牌经销 |
| 类型：标准料 | 品名：POM | 加工级别：注塑级 |
| 产品规格：25KG/包 | 产品特性：高刚POM |
25%玻纤增强高刚POM TENAC GN705日本旭化成
Density / Specific Gravity | |||
-- | 1.56 | g/cm | ASTM D792 |
-- | 1.59 | g/cm | *** 1183 |
Melt Mass-Flow Rate (MFR)(190°C/2.16 kg) | 10 | g/10 min | *** 1133 |
Molding Shrinkage | Internal Method | ||
Flow | 0.40 to 0.60 | % | |
Across Flow | 1.0 to 1.3 | % | |
Water Absorption(24 hr, 23°C, 50% RH) | 0.20 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness | ASTM D785 | ||
M-Scale | 90 | ||
R-Scale | 120 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 9000 | MPa | *** 527-1 |
Tensile Stress | |||
Break | 110 | MPa | *** 527-2 |
-- | 106 | MPa | ASTM D638 |
Tensile Elongation | |||
Break | 6.0 | % | ASTM D638 |
Break | 2.0 | % | *** 527-2 |
Flexural Modulus | |||
-- | 8200 | MPa | ASTM D790 |
-- | 8500 | MPa | *** 178 |
Flexural Strength | 173 | MPa | ASTM D790 |
Taber Abrasion Resistance | 23.0 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | 7.0 | kJ/m | *** 179 |
Notched Izod Impact | 66 | J/m | ASTM D256 |
