| 品牌：TENAC | 是否进口：否 | 产地：日本 |
| 厂家(产地)：日本旭化成 | 牌号：GA510 | 销售方式：品牌经销 |
| 类型：标准料 | 品名：POM | 加工级别：注塑级 |
| 产品规格：25KG/包 | 产品特性：增强POM |
10%玻纤增强POM TENAC GA510日本旭化成
Density / Specific Gravity | 1.50 | g/cm | ASTM D792,*** 1183 |
Melt Mass-Flow Rate (MFR)(190°C/2.16 kg) | 17 | g/10 min | *** 1133 |
Molding Shrinkage | Internal Method | ||
Flow | 1.5 to 1.8 | % | |
Across Flow | 1.2 to 1.5 | % | |
Water Absorption(24 hr, 23°C, 50% RH) | 0.20 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness | ASTM D785 | ||
M-Scale | 92 | ||
R-Scale | 120 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 3400 | MPa | *** 527-1 |
Tensile Stress | |||
Yield | 62.0 | MPa | *** 527-2 |
-- | 63.0 | MPa | ASTM D638 |
Tensile Elongation(Break) | 15 | % | ASTM D638,*** 527-2 |
Flexural Modulus | |||
-- | 3000 | MPa | ASTM D790 |
-- | 3200 | MPa | *** 178 |
Flexural Strength | 96.0 | MPa | ASTM D790 |
Taber Abrasion Resistance | 18.0 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | 4.0 | kJ/m | *** 179 |
Notched Izod Impact | 33 | J/m | ASTM D256 |
