品牌:DIC | 是否进口:否 | 产地:日本 |
厂家(产地):日本油墨 | 牌号:FZL-4033 | 品名:PPS |
产品规格:25KG/包 | 产品特性:***PPS | 销售方式:品牌经销 |
类型:标准料 | 加工级别:注塑级 | 特性级别:增强级、***、*** |
***日本油墨***PPS FZL-4033玻纤PTFE增强
Density / Specific Gravity | 1.68 | g/cm | ASTM D792 |
Molding Shrinkage | ASTM D955 | ||
Flow | 0.25 | % | |
Across Flow | 1.2 | % | |
Water Absorption(24 hr, 23°C) | 0.020 | % | ASTM D570 |
Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness | ASTM D785 | ||
M-Scale | 98 | ||
R-Scale | 118 |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 10000 | MPa | ASTM D638 |
Tensile Strength | 150 | MPa | ASTM D638 |
Tensile Elongation(Break) | 1.6 | % | ASTM D638 |
Flexural Modulus | 9000 | MPa | ASTM D790 |
Flexural Strength | 230 | MPa | ASTM D790 |
Flexural Elongation (Break) | 2.1 | % | ASTM D790 |
Compressive Strength | 180 | MPa | ASTM D695 |
Poisson's Ratio | 0.36 | ||
Coefficient of Friction3 | ASTM D1894 | ||
vs. Steel - Dynamic | 0.22 | ||
vs. Steel - Static | 0.22 | ||
Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | 75 | J/m | ASTM D256 |
Unnotched Izod Impact | 400 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load(1.8 MPa, Unannealed) | 265 | °C | ASTM D648 |
PPS在负荷下的耐蠕变性好,硬度高;***性高,其1000转时的磨耗量仅为0.04g,填充F4及二硫化钼后还会进一步得到改善;PPS还具有一定的自润性。PPS的机械性能对温度的敏感性能小(3)热学性能:PPS具有***的热性能,短期可耐260℃,并可在200~240℃下长期使用;其耐热性与PI相当,仅次于F4塑料,这在热固性塑料中也不多见。