| 品牌：TPX | 是否进口：否 | 产地：日本 |
| 厂家(产地)：三井化学 | 牌号：RT31 | 销售方式：品牌经销 |
| 类型：标准料 | 品名：TPX | 加工级别：注塑级 |
| 产品规格：25KG/包 | 产品特性：高耐热TPX |
日本三井化学高耐热TPX RT31
Density | 0.833 | g/cm | Internal Method |
Melt Mass-Flow Rate (MFR)(260°C/5.0 kg) | 21 | g/10 min | Internal Method |
Spiral Flow3 | 51.0 | cm | Internal Method |
Molding Shrinkage | Internal Method | ||
Flow : 2.00 mm, Injection Molded | 1.6 | % | |
Across Flow : 2.00 mm, Injection Molded | 1.3 | % | |
Water Absorption(Equilibrium) | <0.010 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness(R-Scale, 23°C, Injection Molded) | 83 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus4,5(23°C, Injection Molded) | 1900 | MPa | ASTM D638 |
Tensile Strength4,5 | ASTM D638 | ||
Yield, 23°C, Injection Molded | 30.0 | MPa | |
Break, 23°C, Injection Molded | 25.0 | MPa | |
Tensile Elongation4,5(Break, 23°C, Injection Molded) | 22 | % | ASTM D638 |
Flexural Modulus6(23°C, 3.20 mm, Injection Molded, 51.0 mm Span) | 1450 | MPa | ASTM D790 |
Flexural Strength6(23°C, 3.20 mm, Injection Molded, 51.0 mm Span) | 36.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact(23°C, Injection Molded) | 24 | J/m | ASTM D256 |
Unnotched Izod Impact (Area)(23°C) | 10.0 | kJ/m | ASTM D4812 |
TPX应用于烧杯、培养皿、培养箱（透明性、耐化学性、透水气性）；
化妆品容器、瓶盖（香精）（本身不具塑胶气味、不会干扰原始的香气）；
TPX应用于微波炉餐盒、食器容器（***、耐温性佳、不吸收微波）；
TPX应用于电子、电气零件、LED模条、包覆电缆（绝缘性、挤出级）；
TPX应用于医疗器械：窥镜管、注射器（卫生）；
TPX应用于烤箱器具（高温）；
TPX应用于薄膜（挤出级）
